Connecting An Emlid Reach RX2 to Diamond Maps

The instructions below were written specifically for the Reach RX2 GNSS device by Emlid. These differ from the steps for the Emlid Reach RS3.

Compatibility	Android	Apple	Windows
Diamond Maps Online (browser)
Diamond Maps Offline App
Works great Some limitations Not compatible

Using Diamond Maps Offline App with Android Device

Power on the RX2
Note: The GNSS Master app is not needed for this type of interface. If it is running you will need to close it before continuing.
On your phone or tablet go to the Bluetooth settings screen in the Settings app.
If the RX2 is not already in the list of paired devices then select it from the list of available devices.
These instructions assume you already have a Diamond Maps account. If you don't then go to diamondmaps.com and start a free trial. See Video #201 for instructions on adding some layers to your map which you will need prior to proceeding.
Go to your Google Play Store and install "Diamond Maps Offline". Open the app and enter your Diamond Maps user name and password. Then click the Download button to download one of your maps to your phone/tablet for offline use.
Click on the map name to open the map in the offline app.
Click the Menu button and choose GPS Status
Click the select button on the GPS Source line and select Scan for Bluetooth devices. Select your RX2 from the list.
If you see Lat, Lon, and Accuracy readings changing in the grey box then that confirms that Diamond Maps is connected to the RX2.
Close the GPS Setup screen if you haven't done so already
Setup is complete. Next see How To Use Your GPS To Mark A Point.

Power on the RX2
Note: The GNSS Master app is not needed for this type of interface. If it is running you will need to close it before continuing.
On your phone or tablet go to the Bluetooth settings screen in the Settings app. Find the RX2 in either the list of My Devices or list of Other Devices and click on it to connect to it. When connected, your Bluetooth settings screen will say "Connected" next to the RX2.
These instructions assume you already have a Diamond Maps account. If you don't then go to diamondmaps.com and start a free trial. See Video #201 for instructions on adding some layers to your map which you will need prior to proceeding.
Go to your Apple app store and install "Diamond Maps Offline". Open the app and enter your Diamond Maps user name and password. Then click the Download button to download one of your maps to your phone/tablet for offline use.
Click on the map name to open the map in the offline app.
Click the Menu button and choose GPS Status
Click the Select button next to GPS Source and choose your RX2 from the list.
If you see Lat, Lon, and Accuracy readings changing in the grey box then that confirms that Diamond Maps is connected to the Geode.
Close the GPS Setup screen if you haven't done so already
Setup is complete. Next see How To Use Your GPS To Mark A Point

Notes: